The chassis is found at the top of the tripod where the legs connect. The centre column of a tripod is basically a pole that is either mounted on the chassis or slides right through it. The main purpose of the centre column is to add extra height to the tripod. In some tripods, this is done by using a lever to crank up the column or lower it. Another use of the centre column is as a lateral arm.
This is where the centre column is positioned horizontally from the chassis. This positioning makes the tripod suitable for shots taken from directly above the subject such as food photography and product photography, to name a few.
In most cases, the centre column has a hook at the bottom, which is sometimes retracted. The purpose for this hook is to allow you to hang weights from it in order to make the tripod sturdier. When the centre column is used as a lateral arm, the centre of gravity may shift. Adding weights to the hook will help resolve that issue. Some centre columns can be removed from the chassis and used as standalone monopods.
Again, it all depends on design. The main function of the head is to allow you to attach a camera to the tripod and point it in the direction in which you want to shoot, all while keeping your camera steady. Whether the head is fixed or detachable depends on the tripod. Cheaper ones tend to only have fixed heads. This type of tripod head is also called a 3-way head because you can pan left and right, tilt up and down, and also tilt it to the side to switch between landscape and portrait.
Although you get precise movements on each axis, pan-tilt heads are cumbersome because of the many control handles they ha ve. Ball heads are smaller, lighter, and simpler to use than pan-tilt heads and are, therefore, the preferred choice in smartphone photography.
Ball heads have a ball that controls the movement of the head. The ball head is a rather flexible type of tripod head, but it can be quite difficult to change the position of the camera on one axis without affecting the other.
To help you keep your tripod level, some tripod heads have a spirit level. This is a liquid with an air bubble that you have to manoeuvre to the centre to ensure your horizon is level. This is a useful feature that prevents your photos from coming out skew. Tripods usually have a removable plate with a screw that sits atop the tripod head. This plate can be screwed into the port found at the bottom of ordinary cameras. It has a quick release system, which allows you to remove the camera from the tripod should you need to take some hand-held shots in a hurry.
Note that the plate has a screw that screws into the bottom of a camera. Therefore, a special mount or clamp is required in order to securely do so. Sometimes, tripods come pre-packaged with such a mount.
In other instances, this adaptor needs to be purchased separately. Great care must be taken when buying this accessory because it has to fit your phone perfectly. This will help increase the quality of your pixels when you go to blow up your photo.
Use a tripod for specific styles and techniques. Most photographers will employ a tripod when shooting landscapes to get the highest amount of details in their photos. Taking macro photos will almost always require the use of a tripod to take precise, close-up shots as well. A photographer may also elect to use a tripod to create a motion blur effect, take panoramic shots, or blend multiple shots.
Asses your environment. Figure out how much you will need to move. Sometimes if you're taking pictures of sports or wildlife you won't be able to remain stationary to get the shots you want. It isn't feasible to keep moving and setting up your tripod, so you're better off to go without it.
Instead, turn up the shutter speed on your camera to get your handheld photos as crisp as possible. You can do this by switching your camera from auto to manual, or from switching from "Aperture Priority" to "Shutter Priority" on you camera settings. The wide base of the tripod makes for a big obstacle in crowded places.
Your shot could get ruined if someone bumps one of the legs. Someone might even knock over your equipment or trip and get injured. Instead, you may want to look into getting a monopod for photographing in such situations.
Skip the tripod when using the flash as the light source. Since a flash is brief you won't need a tripod when using it as your main source of light. Part 5. Check to make sure the tripod is compatible with your camera. Check the base of the camera and the plate on top of the tripod. Be sure that the camera will be able to attach to the tripod. While most professional cameras will work with professional tripods, not all products are universal. Note the weight of the tripod.
Flimsy tripods may seem tempting, but they will not provide much stability. If you have an expensive camera, the last thing you want is to have it broken because the wind blew your lightweight tripod over. Check the weight of different models and find one that is going to be sturdy, but not too difficult for you to carry around. Look for helpful features. Tripods may all seem to do the same thing, but some are better than others.
Purchasing a tripod with a hook for a camera bag or built-in level can make a big difference in getting better pictures. Look over the knobs and feet on the tripod legs, too.
Then assess the overall value of the tripod before deciding on your purchase. Cesar Grossmann. You can use Auto ISO, but it's better to get the right exposure using shutter speed and lens aperture. Mirror up and mirror lock settings are features of DSLR cameras, read the camera's manual to learn how to set these options. Yes No. Not Helpful 0 Helpful 0. Include your email address to get a message when this question is answered.
Keep the documentation handy if it came with any. You will find yourself referring to it. Helpful 0 Not Helpful 0. Experiment with each part. Getting familiar will help you to set up your tripod quickly. Related wikiHows How to. How to. More References 2. About This Article. Co-authored by:. Heather Gallagher. Co-authors: At the top of the canopy is the friction control lock, this holds and releases the central column.
On this tripod, I can unscrew the friction control from the canopy and then the Tri-Mount plate with the head can be attached for low-level shooting, as previously mentioned.
There are two significant parts of this small but essential part of the tripod design. The hinge and leg mechanism enable the leg to be attached and leg angles to be selected when the leg catch is released. The main event. The legs can make or break a tripod and differ in weight and strength depending on the intended use of the tripod. These are usually made from aluminium or carbon fibre. In the past steel and wood have also been popular options. At the top of the leg is the hinge mechanism which bolts to the canopy.
Built into this is the catch which enables the leg to be released and moved to the selected angle. Moving down the legs and each section is held in place by a leg lock. Here we have twist locks, the main alternative design is lever locks which can be seen on the Punks Patti. Twist locks are brilliant, but will inevitably need a good clean and service at some point in the life of the tripod.
When they are removed for cleaning it will reveal a few additional component parts. On the outer, there is the leg rubber. This is the grippy part of the twist grip. The shim keeps the action of the legs smooth, true and stops each section from rotating inside the others as over time this movement would cause wear. This is what compresses on the leg to hold it in place.
A nice feature of some modern tripods is the removable leg. This untwists from the leg hinge and can then be bolted to the centre column or directly onto the Tri-Mount plate to create a monopod or boom.
Finally, we reach the base of the tripod, who thought there could be so much to learn about the humble support?
The feet. The standard feet are usually rubber, this is an excellent all-round material and will offer the best tripod to ground grip in most situations.
Having removable feet means that they can be swapped and changed as you need to suit the terrain. On 3 Legged Thing tripods, the feet can be unscrewed, and an alternative such as the wide footed Clawz can be attached.
0コメント